cctv systems
alarms
wire free door chimes
fire protection
fans
heaters
solar lighting
electronic timers
night lights
dect phones
electrical appliances
wireless remote adapters
digisenders
torches
insect killers
outdoors
battery chargers
batteries
energy saving lighting
accessories
floor care
key finders
clocks
mantel clocks
wall clocks
alarm clocks
gents' watches
ladies' watches
watch straps
gadgets and gizmos
electronic dictionaries
fun
electronics
portable media
car care
clearance
miscellaneous

Wireless CCTV systems

2.4GHz Night Vision Camera Kit - 812K
Price: £94.99
2.4GHz Wireless Night Vision Infrared Weatherproof Camera and receiver package. This night vision camera can operate in total darkness (0.00 Lux) with the aid of the fitted 12 high power infrared LED\'s. These LED\'s will offer a total darkness night vision range of approx. 5 metres, this range will be increased by any extra lighting in the vicinity. This camera is also fitted with a light sensor and when the light falls below a certain level the infrared LEDs are automatically switched on. Please note, when the night vision camera is operating in low light/total darkness the images will appear in B/W. During daytime operation images will be in colour. This camera is weatherproof and can be installed outside. Installation is simple and output can be easily recorded with an ordinary VCR or DVR without the need for any other accessories. Kit Includes: 2.4GHz Infrared Colour Wireless Camera. 2.4GHz Receiver & Antenna. 12v Power Adaptor (for receiver). 8v/9v Power Adaptor (for camera). AV cable (composite cable for connection to TV/VCR/DVR etc). Battery Clip (for cam connection to 9v PP3 battery, will offer limited running time of approx 2hrs.) Instruction manual. Features: Infrared night vision capable. Wireless video/audio transmission & reception. Low power consumption. Metal weatherproof casing and fixing bracket. Easy to install & operate. Transmitter / camera size: 3.0cm (W) 3.0cm (H) 4.0cm (D) . Full Package System Specifications: Range of 75m \"straight-line of sight\", can go through walls but ranges vary. Resolution of 380 TV lines. Output power : 10mW Low minimum illumination of 0 lux..

2.4GHz CCD Night Vision Cam Kit - 906k
Price: £149.99
2.4GHz Wireless CCD Night Vision Infrared Weatherproof Camera (with visor) and receiver package. This night vision camera can operate in total darkness (0.00 Lux) with the aid of the fitted 23 high power infrared LED\'s. These LED\'s will offer a total darkness night vision range of approx. 10 metres, this range will be increased by any extra lighting in the vicinity. This camera is also fitted with a light sensor and when the light falls below a certain level the infrared LEDs are automatically switched on. Please note, when the night vision camera is operating in low light/total darkness the images will appear in B/W. During daytime operation images will be in colour. This camera is weatherproof and can be installed outside. Installation is simple and output can be easily recorded with an ordinary VCR without the need for any other accessories. This camera will also transmit audio. Kit Includes: 2.4GHz Infrared CCD Wireless Camera. 2.4GHz Receiver & Antenna. 2 x 12V Power Adaptor. AV cable (for receiver connection to TV/VCR/DVR). Instruction Manual. Features: Infrared night vision capable. Wireless video & audio transmission & reception. Low power consumption. Metal weatherproof casing and fixing bracket. Easy to install & operate. Full Package System Specifications: Range of 50m \"straight-line of sight\", can go through walls but ranges vary. Resolution of 420 TV lines Output power : 10mW. Low minimum illumination of 0 lux. Camera Weight - 170g (exc bracket). Angle of View - 62 degrees (approx). Camera Dimensions - 85 x 57 x 57(mm).

2.4GHz Handheld LCD Camera Kit - 711K
Price: £169.99
This ingenious 2.4GHz handheld receiver has a built in 2.5\" LCD screen. The receiver has 4 channels so you can monitor upto four 2.4GHz wireless cameras - both video and audio (dependant upon camera). Requires 4 x AAA batteries (not included) for completely wireless functionality, however you can run the receiver/monitor directly from the 6v mains power adaptor supplied. The unit has a built in speaker for audio monitoring. Receiver also has a \"Video OUT\" so footage can be recorded using a standard VCR, DVR, camcorder (camcorder must have phono video input) etc. This camera kit is ideal as a baby monitor aswell as countless other temporary surveillance situations. LCD Receiver Specifications : 2.5\" LCD TFT Screen. Resolution of 480x234. 4 Channel 2.4GHz Receiver. Rec/Mon Dimensions : 130x65x30(mm). Camera Specifications: 1/3\" CMOS Camera (click \"large view\" above for picture of camera included in this kit). Pinhole Lens. 380 TV Lines. Min Illumination - 2 lux. Auto Gain Control. Kit Includes : 2.5\" LCD Receiver. Wireless Camera. 6v Power Adaptor (rec). 8v Power Adaptor (cam). Battery Clip (for camera). Video Cable. Earphone. Instruction Manual.

Wireless DVR Camera Kit - PAK-WDVRSD
Price: £199.99
This smart product is basically a 2.4GHz Wireless Camera Kit but the receiver unit has a built in Digital Video Recorder! The DVR has an internal memory of 16MB that can store up to 230 \"stills\" or 50 ten second video clips. This can be increased considerably by using a 2G SD Card (version available below), then allowing up to 28800 \"stills\" and 4380 ten second video clips!! The camera (our high quality PAK-901 model) supplied uses a 1/4\" CCD chip, pinhole lens and offers a resolution of 420 TV lines. The DVR is extremely simple to use and has motion detection recording plus time and date event stamping. Ideal for temporary or easily portable solutions. As always, wireless ranges vary and will depend upon obstructions, weather conditions and other wireless equipment on location. DVR / Receiver Specification : Receiver Frequency - 2.4GHz Antenna (supplied) - 50 ohm SMA Internal Storage - 16MB Photo Format - JPEG Photo Pixels - 640x480 Video Format - AVI Video Pixels - 320x240 Power Supply - 5v (mains power adaptor supplied) Consumption - 450mA Dimensions - 152x104x24 (mm) Weight - 200g Camera Specification : Image Sensor - 1/4\" CCD Resolution - 420 TV Lines Pinhole Lens Auto Gain Control Frequency - 2.4GHz Transmission Power - 10mW Power Supply - 12v (mains power adaptor supplied) Current Consumption - 100mA Dimensions - 35x35x20 (mm) Full DVR instruction manual supplied.

Handheld LCD Recorder/MPEG4 Kit - 811KSD
Price: £269.99
This ingenious device doubles as a 2.4GHz handheld receiver & digital recorder. It has a built in 2.5\" LCD screen and 64MB of internal recording space to capture your wireless camera images. The unit is fitted with an SD memory card slot so the memory can be increased to over 2GB allowing for the capture of up to 12 hours of video footage. The receiver has 4 channels so you can monitor upto four 2.4GHz wireless cameras - both video and audio (dependant upon camera). Has a built-in rechargeable Li-battery for completely wireless functionality, however you can run the receiver/monitor directly from the 5V mains power adaptor supplied. The unit has a built in speaker for audio monitoring and a \"Video OUT\" so footage can be recorded using a standard VCR, DVR, camcorder (camcorder must have phono video input) etc. This kit is ideal in countless covert or temporary surveillance situations. LCD Receiver Specifications : 2.4GHz 4-channel wireless monitor / recorder. AVI format MPEG-4 wireless video recorder, with real-time display. MP3, MP4 player & picture browsing. Wired video recording and TV recording capabilities. 882*228 high-definition 2.5inch TFT LCD display screen. Built-in 64MB memory block Supports MMC, SD card and U disc (up to 2GB). Supports OTG and USB 2.0 high-speed interfaces. Can be connected to separate monitor/TV to review recorded footage. Built-in, high-capacity lithium battery, 5h continuous use. Camera Specifications: 1/3\" CMOS Camera (click \"large view\" above for picture of camera included in this kit). Pinhole Lens. 380 TV Lines. Min Illumination - 2 lux. Auto Gain Control. Kit Includes : 2.5\" LCD Receiver / Recorder. Wireless Camera. 5v Power Adaptor (rec). 8v Power Adaptor (cam). Battery Clip (for camera). Video Cable. Earphone. Instruction Manual.

Spy Camera 4 camera wire free monitoring system - mct04s
Price: £269.99
This package includes 4 wireless, colour, pinhole cameras and a receiver unit. The cameras transmit both video and audio at 2.4GHz, on four different channels, back to the Sequencing Receiver unit. The receiver allows manual selection of any of the four channels or auto sequencing through each one in turn. You can even select certain cameras to be viewed in sequence, i.e. if you only wish to view cameras 2&4 you can simply cut 1&3 out of the loop. These cameras are lightweight and very small making this system ideal for covert surveillance applications. PLEASE NOTE:2.4GHz cameras have built in transmitters with 10mW output power. This strength transmitter will give you a maximum range of approximately 75m - clear line of sight. Obstructions will reduce this distance, metal obstructions (e.g. cars or wire mesh) will all but wipe it out. Indoors, you can realistically expect approximately 10m-20m. wireless ranges can and do vary greatly depending upon site conditions, obstructions etc. At 2.4GHz improved ranges can often be achieved by adding High Gain Antennas to your receiver and/or transmitter. Package Includes : 2.4GHz Spy Camera (x4). 2.4GHz Sequencing Receiver. AV Cable. 12v Power Adaptor. 8v Power Adaptor (x4). Battery Clip (x4). Camera Stand (x4).

4 Wireless Security Camera System - mct0202
Price: £279.99
This package includes 4 wireless, colour, security cameras and a receiver unit. The cameras transmit both video and audio at 2.4GHz, on four different channels, back to the Sequencing Receiver unit. The receiver allows manual selection of any of the four channels or auto sequencing through each one in turn. You can even select certain cameras to be viewed in sequence, i.e. if you only wish to view cameras 2&4 you can simply cut 1&3 out of the loop. These cameras are weatherproof and have a fixing bracket attached, making this system ideal for both indoor and outdoor security applications. PLEASE NOTE:2.4GHz cameras have built in transmitters with 10mW output power. This strength transmitter will give you a maximum range of approximately 75m - clear line of sight. Obstructions will reduce this distance, metal obstructions (e.g. cars or wire mesh) will all but wipe it out. Indoors, you can realistically expect approximately 10m-20m. wireless ranges can and do vary greatly depending upon site conditions, obstructions etc. At 2.4GHz improved ranges can often be achieved by adding High Gain Antennas to your receiver and/or transmitter. Package Includes : 2.4GHz Spy Camera (x4). 2.4GHz Sequencing Receiver. AV Cable. 12v Power Adaptor. 8v Power Adaptor (x4).

4 channel external/internal colour wire free CCTV system - mct04ex
Price: £329.99
This package includes 4 wireless night vision cameras and a receiver unit. The cameras transmit both video and audio at 2.4GHz, on four different channels, back to the Sequencing Receiver unit. The receiver allows manual selection of any of the four channels or auto sequencing through each one. You can even select certain cameras to be viewed in sequence, i.e. if you only wish to view cameras 2&4 you can simply cut 1&3 out of the loop. The cameras have 12 built in infrared leds which offer a "complete darkness" night vision range of approximately 5 metres. They are also weatherproof making this package ideal for either indoor or outdoor surveillance applications. PLEASE NOTE: 2.4GHz cameras have built in transmitters with 10mW output power. This strength transmitter will give you a maximum range of approximately 75m - clear line of sight. Obstructions will reduce this distance, metal obstructions (e.g. cars or wire mesh) will all but wipe it out. Indoors, you can realistically expect approximately 10m-20m. wireless ranges can and do vary greatly depending upon site conditions, obstructions etc. At 2.4GHz improved ranges can often be achieved by adding High Gain Antennas to your receiver and/or transmitter. Package Includes : 2.4GHz Night Vision Camera (x4) 2.4GHz Sequencing Receiver AV Cable Power Adaptor (x5)

2.4GHz CCD Night Vision Package - mct05exz
Price: £429.99
This package includes 4 wireless night vision CCD cameras and a channel switching receiver unit. The cameras transmit video at 2.4GHz, on four different channels, back to the receiver unit. This receiver will allow you to automatically switch from camera to camera or manually switch at the touch of a button. PLEASE NOTE: The cameras have 23 built in infrared leds which offer a \"complete darkness\" night vision range of approximately 10 metres. They are weatherproof and come with ball and socket joint fixing brackets making this package ideal for either indoor or outdoor surveillance. Please note, the cameras are colour during the day and switch to black & white as soon as the infrared leds power up (automatic). PLEASE NOTE: 2.4GHz cameras have built in transmitters with 10mW output power. This strength transmitter will give you a maximum range of approximately 75m - clear line of sight. Obstructions will reduce this distance, metal obstructions will all but wipe it out. Indoors, you can realistically expect approximately 10m-20m. wireless ranges can and do vary greatly depending upon site conditions, obstructions etc. At 2.4GHz improved ranges can often be achieved by adding High Gain Antennas to your receiver and/or transmitter. 2.4GHz CCD Night Vision Camera (x4) 2.4GHz Sequencing Receiver + Antenna AV Cable Power Adaptor (x5)